1. Connect the device to a power source using the cable and adapter provided in the purchase package.
2. Install the BIOTA application on your cellphone, which you can download via Playstore.
3. Select Add device.
4. Select Device Type and adjust it to the type.
5. Scan the QR Code to the camera device with a distance of 15 cm to 20 cm. Follow the process until complete.

You can press the reset button for 5 seconds, then a sound will appear and the indicator light will flash red. The device is ready to be paired to the BIOTA application.

1. Make sure the smart wireless doorbell device can receive good quality Wi-Fi signals.
2. Make sure that the cellphone and the smart wireless doorbell device that will be paired are connected to the same network (same Wi-Fi).
3. Make sure the smart wireless doorbell device has been reset.

The maximum SD Card capacity that can be used by Smart Wireless Doorbell is 128 GB

Here is the estimated SD Card storage:
Capacity 32GB +/- 3-4 days, 64GB +/- 6-7 days, 128GB +/- 12-14 days.
The estimate depends on how much/often the image changes and is captured by the IP Camera.
If you use event recording mode (record only when there is movement), you can record much longer.

You can click the smart wireless doorbell device on the settings page, then click "Bell Setting". Select the ringtone as desired. There are 4 ringtone options.

Currently, the smart wireless doorbell can only be connected to 1 wireless chime.

The maximum distance between the Smart wireless doorbell and the indoor wireless chime is 15 meters without obstacles.

Smart Wireless Doorbell already supports IP65 resistance to low pressure water and dust so it is durable when used outdoors.

Smart Wireless Doorbell can be recharged when the battery is close to the minimum limit. Smart Wireless Doorbell uses a 5200 mAh battery that has a durability of up to 2 months (active mode) / 6 months (standby mode).