1. Connect the device to a power source using the cable and adapter provided in the purchase package.
2. Install the BIOTA application on your cellphone, which you can download via Playstore.
3. Select Add device.
4. Select Device Type and adjust it to the type.
5. Scan the QR Code to the camera device with a distance of 15 cm to 20 cm. Follow the process until complete.

You can press the reset button for 5 seconds, then a sound will appear and the indicator light will flash red. The device is ready to be paired to the BIOTA application.

The maximum SD Card capacity that can be used by the Smart Camera Outdoor PTZ is 128 GB.

Here is the estimated SD Card storage:
1. Capacity 32GB +/- 3-4 days, 64GB +/- 6-7 days, 128GB +/- 12-14 days. The estimation depends on how much/often the images change and are captured by the IP Camera.
2. If you use event recording mode (record only when there is movement), you can record much longer.

You can click the device according to the type on the settings page, then click "motion detection settings". Slide the button to enable or disable the motion tracking feature.
If you want to receive an alert in the app when motion is detected, you can also activate the alarm switch when motion is detected.

You can click the outdoor PTZ smart camera device on the settings page, then click "Offline Notification". Slide the button to enable the notification.
If you don't want to receive alerts in the app when your device is offline, you can also disable them.

The speaker volume is set to maximum, the volume cannot be adjusted.

Smart Camera Outdoor PTZ already supports IP65 resistance to low pressure water and dust so it is durable when used outdoors.

Smart Camera Outdoor PTZ is equipped with Pan & Tilt features, namely right/left & up/down rotation capabilities that are capable of monitoring a wider area with a Pan angle of up to 355° & Tilt of up to 90°.