1. Connect the device to a power source using the cable and adapter provided in the purchase package.
2. Install the BIOTA application on your cellphone, which you can download via Playstore.
3. Select Add device.
4. Select Device Type and adjust it to the type.
5. Scan the QR Code to the camera device with a distance of 15 cm to 20 cm. Follow the process until complete.

You can press the reset button for 5 seconds, then a sound will appear and the indicator light will flash red. The device is ready to be paired to the BIOTA application.

1. Make sure the indoor fixed smart camera device can receive good quality Wi-Fi signals.
2. Make sure that the cellphone and the indoor fixed smart camera device that will be paired are connected to the same network (same Wi-Fi).
3. Make sure the indoor fixed smart camera device has been reset.

The maximum SD Card capacity that can be used by the Smart Camera Indoor Fixed is 128 GB

Here is the estimated SD Card storage:
1. Capacity 32GB +/- 3-4 days, 64GB +/- 6-7 days, 128GB +/- 12-14 days. The estimation depends on how much/often the images change and are captured by the IP Camera.
2. If you use event recording mode (record only when there is movement), you can record much longer.

If the SD Card storage is full, it will automatically overwrite the earliest date / time recording stored on the SD Card. You can also enable the Cloud recording storage feature.

You can click the indoor fixed smart camera device on the settings page, then click "Offline Notification". Slide the button to enable the notification. If you don't want to receive alerts in the app when the device is offline, you can also disable it.

You can format the SD Card first using FAT32 format or format the SD Card on the camera device.

You can play the recorded files using a codec application.

The speaker volume is set to maximum, the volume cannot be adjusted.